Hello everyone,
I have already tried twice in vain to buy the right RAM for my server. At the moment I have 2x16GB and I would like to have 2x16GB again at a reasonable price.
I have the following server: Fujitsu Primergy TX1330 M2 (https://www.ebay.de/itm/125750043244)
My currently installed RAM:
Memory Device
Array Handle: 0x0029
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: DIMM CHB2
Bank Locator: BANK 3
Type: DDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: Samsung
Serial Number: 3521AA0D
Asset Tag: 1710
Part Number: M391A2K43BB1-CRC
Rank: 2
Configured Memory Speed: 2133 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
and I have just purchased the following RAM:
Unfortunately, the server does not boot and only beeps. The server only boots with the RAM that was already in the server, all other attempts are unfortunately unsuccessful. Before I buy the wrong RAM again, I would like to know what to look out for? Thank you
If only something like a search engine, existed, I could search for a manual. Fuck. What a life.
UDIMM DDR4 2133mhz, memory module from 4,8 and 16GB. Max 64GB. It can support ECC.
Ah, UDIMM is unbuffered DIMM.
Stick with the 16Gb you already have and it’s fine.
Xeon E3’s are unbuffered DIMMs only.