So, 250/300 w during full load. 100 degrees is reached in some seconds, idle temp is 25.

Cpu pushes to the tj max and downlock to reach 98 degrees. Then pushes again towards 100 degrees.

It’s the spec. But i want to know: if i launch a rendering 24 hours a day for weeks, can it sustain this load at 100 degrees without any damage?

Thanks

  • Good_Season_1723@alien.topBEnglish
    1·
    1 year ago

    Define damage. Just using your cpu for anything basically damages it. Electromigrarion happens even at 50c while your cpu is idle. Obviously higher temps and higher amperage accelerates it.

    The question is why would you want to run it 24/7 at 100c? Set an 80c power limit and you are good to go.

    • xgiovio@alien.topOPBEnglish
      1·
      1 year ago

      I could, so i want to know: if the tj max is 100, what is the life of the cpu at 100 constantly?

      • Good_Season_1723@alien.topBEnglish
        1·
        1 year ago

        Nobody can tell you that, and it entirely depends on the amperage going through your cpu, temperatures are not that important. If you are running prime 95 pulling 400 watts at 100c I don’t think it will last more than a year.