Hello! I have recently begun gaming on Nobara Linux and overall, my experience has been quite good. The biggest issue I’ve experienced so far is not being able to control my Lian Li SL V2 fan controller. The fans connected to the controller are only recognized in my BIOS once I run L-Connect 3 in windows but if my system is shut down, they are no longer seen. I have seen this https://github.com/EightB1ts/uni-sync and a plugin for OpenRGB, but keep running into compilation errors and/or lack of maintaining the project. Any advice is very appreciated!

  • Overdraft@lemmy.ml
    link
    fedilink
    English
    arrow-up
    1
    ·
    3 months ago

    I’m not familiar with Nobara, but I can at least show how I would install pyUSB for use in Debian:

    If you follow the instructions exactly as in the readme, it will error:

    $ pip install pyusb
    error: externally-managed-environment
    
    × This environment is externally managed
    ╰─> To install Python packages system-wide, try apt install
        python3-xyz, where xyz is the package you are trying to
        install.
        
        If you wish to install a non-Debian-packaged Python package,
        create a virtual environment using python3 -m venv path/to/venv.
        Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
        sure you have python3-full installed.
        
        If you wish to install a non-Debian packaged Python application,
        it may be easiest to use pipx install xyz, which will manage a
        virtual environment for you. Make sure you have pipx installed.
        
        See /usr/share/doc/python3.11/README.venv for more information.
    
    note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
    hint: See PEP 668 for the detailed specification.
    

    Instead, I would create a virtual environment (I’m using virtualenv instead of venv)

    $ virtualenv unihub_test
    

    Then activate the environment and run the install with pip

    $ source ~/unihub_test/bin/activate
    (unihub_test) $ pip install pyusb
    Collecting pyusb
      Using cached pyusb-1.2.1-py3-none-any.whl.metadata (2.2 kB)
    Using cached pyusb-1.2.1-py3-none-any.whl (58 kB)
    Installing collected packages: pyusb
    Successfully installed pyusb-1.2.1
    
    (unihub_test) $ python3
    >>> import usb #this should not error
    >>> exit()
    (unihub_test) $ deactivate
    $ 
    

    Without the actual hub, that’s as far as I can go I think - but maybe this will help give you some options and documentation to explore!