I’m trying to print vase mode for the first time and I did get to print the first try, but this is happening on the bottom 4 layers. I have a 0.8 nozzle so the line width is set to 0.6 and the layer hight to 0.4. Even if I change my bottom thickness to 0.4 (1 layer) I still get this problem. Shouldn’t vase mode print without stops? I feel like I’m asking a very dumb questions but I’m missing sone importabt info here lol

  • elDalvini@discuss.tchncs.deEnglish
    1·
    3 months ago

    This seems to be a bug in the slicer. I’m seeing the same issue in OrcaSlicer if the skirt height is set to more than one layer (even if the skirt is disabled). This makes sense if a skirt is used (can’t print a continuous spiral if you have to switch between printing the object and the skirt), but not if it’s disabled.

    What slicer are you using? If it’s a PrusaSlicer fork, this is likely the same bug.