• 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍@midwest.social
    link
    fedilink
    arrow-up
    9
    arrow-down
    1
    ·
    11 months ago

    While I don’t agree they’re better, a key feature over conventional electric (and one of the main benefits of gas) is that the stove surface doesn’t inherently retain heat. They get hot, but only because the pan is hot. When you turn down the heat, it’s immediate, like a gas stove.

    I don’t know about how fast they can heat; gas can output a ridiculous amount of BTUs, but at 240v I wouldn’t be surprised.

    • sushibowl@feddit.nl
      link
      fedilink
      arrow-up
      5
      ·
      11 months ago

      Have to keep efficiency in mind as well. Practically all of the heat produced by induction goes directly into the pan bottom. With gas, quite a bit of the heat doesn’t end up in the pan.

      In my experience, induction on high settings heats much faster than gas. Sometimes faster than is desirable actually. A pot of water will boil at the bottom when the top is only somewhat warm.

    • 768@sh.itjust.works
      link
      fedilink
      arrow-up
      5
      arrow-down
      1
      ·
      11 months ago

      I don’t know about the US, but in Germany it’s common that the individual or two plates of the induction stoves have their own 380V cable and breaker.

      • Kecessa@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        11 months ago

        North America has one 240v plug for the whole appliance, 120v is what’s used for regular electric items.

      • The US often has some appliances wired for 240V; I assume stovetops are, but IDK. Large appliances have their own breakers. I was told that if we wanted to install a built-in microwave, it’d require a new, dedicated wire and breaker.

        • silence7@slrpnk.netM
          link
          fedilink
          arrow-up
          4
          ·
          11 months ago

          A lot of places have code requirements that the microwave have its own breaker even though they’re almost all 120v; it’s because they use almost all the amps on the 120v circuit so you tend to trip the breaker if you have anything else big going on, like an electric kettle or a vacuum cleaner.