I want to move away from Cloudflare tunnels, so I rented a cheap VPS from Hetzner and tried to follow this guide. Unfortunately, the WireGuard setup didn’t work. I’m trying to forward all traffic from the VPS to my homeserver and vice versa. Are there any other ways to solve this issue?

VPS Info:

OS: Debian 12

Architecture: ARM64 / aarch64

RAM: 4 GB

Traffic: 20 TB

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    7 months ago

    On the surface, that looks like it should work (assuming all the keys are correct and 51820/udp is open to the world on your VPS).

    Can you ping the VPS’s WG IP from your homeserver and get a response? If so, try pinging back from the VPS after that.

    Until you get the bidirectional traffic going, you might try pulling out the iptables rules from your wireguard script and bringing everything back up clean.

    • AlexPewMaster@lemmy.zipOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      I do not get a response when pinging the VPS’s WG IP from my homeserver. It might have something to do with the firewall that my VPS provider (Hetzner) is using. I’ve now allowed the port 51820 on UDP and TCP and it’s still the same as before… This is weird.

      • Admiral Patrick@dubvee.org
        link
        fedilink
        English
        arrow-up
        2
        ·
        7 months ago

        I’m not familiar with Hetzner, but I know people use them; haven’t heard any kinds of blocks for WG traffic (though I’ve read they do block outbound SMTP).

        Maybe double-check your public and private WG keys on both ends. If the keys aren’t right, it doesn’t give you any kind of error; the traffic is just silently dropped if it doesn’t decrypt.

        • AlexPewMaster@lemmy.zipOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          Hmm, the keys do match on the two different machines. I have no idea why this doesn’t work…

          • Admiral Patrick@dubvee.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            7 months ago

            Dumb question: you’re starting wireguard right? lol

            In most distros, it’s systemctl start wg-quick@wg0 where wg0 is the name of the config file in /etc/wireguard

            If so, then maybe double/triple check any firewalls / iptables rules. My VPS providers don’t have any kind of firewall in front of the VM, but I’m not sure about Hetzner.

            Maybe try stopping wireguard, starting a netcat listener on 51820 UDP and seeing if you can send to it from your homelab. This will validate that the UDP port is open and your lab can make the connection.

            ### VPS
            user@vps:  nc -l -u VPS_PUBLIC_IP 51820
            
            ### Homelab
            user@home:  echo "Testing" | nc -u VPS_PUBLIC_IP 51820
            
            ### If successful, VPS should show:
            user@vps:  nc -l -u VPS_PUBLIC_IP 51820
            Testing
            
            

            I do know this is possible as I’ve made it work with CG-NAT on both ends (each end was a client and routed through the VPS).

            • AlexPewMaster@lemmy.zipOP
              link
              fedilink
              English
              arrow-up
              2
              ·
              7 months ago

              The command you provided for the VPS returns UDP listen needs -p arg, so I just added -p right before the port number and then it worked. Running the homelab command returns no port[s] to connect to… Not good.

              • Admiral Patrick@dubvee.org
                link
                fedilink
                English
                arrow-up
                3
                ·
                7 months ago

                At least that points you to the problem: firewall somewhere.

                Try a different port with your netcat test, perhaps? 51820 is the well-known WG port. Can’t imagine they’d intentionally block it, but you never know.

                Maybe Hetzner support can offer more guidance? Again, I’m not sure what or how they do network traffic before it gets to the VM. On all of mine, it’s just a raw gateway and up to me to handle all port blocking.

                If you figure that part out and are still stuck on the WG part, just shoot me a reply.